Skip to content

Device Access ​

Choose a tutorial according to the protocol your device uses, then verify the connection method. There are 25 articles in total, covering connection preparation, product and Thing Model configuration, data reporting, control, and result verification. The FMQX used in the tutorials' demonstrations is FastBee's own client tool, different from the third-party MQTTX.

Reading Notes

This content is compiled from existing operation manuals. Connection addresses, device identities, Thing Models, and time ranges should be replaced with the actual values of your own environment; parts marked "expected result", "not executed", or "saved only" in the source material must be further verified in the actual environment.

UDP Manual Applicability Limits

The 4 UDP manuals are retained as supplementary references; the original drafts still have pending items and have not completed the same scope of full re-verification as the other tutorials. The IEC103 UDP tutorial is not a replacement for the TCP gateway tutorial. Verify your own protocol, device identity, and send/receive results before using them in real projects.

JSON ​

TutorialReading Notes
JSON and MQTT Thermostat AccessFollow this article's steps and verify the results
JSON and TCP Thermostat AccessFollow this article's steps and verify the results
JSON and MQTT WebSocket Web Temperature Control AccessFollow this article's steps and verify the results
JSON and UDP Wireless Temperature Control AccessSupplementary reference; read the applicability limits before use

JSON Array ​

TutorialReading Notes
JSON Array and MQTT Temperature Control AccessFollow this article's steps and verify the results
JSON Array and TCP Terminal AccessFollow this article's steps and verify the results
JSON Array and UDP Wireless Terminal AccessSupplementary reference; read the applicability limits before use
TutorialReading Notes
Alink JSON and MQTT Temperature Control AccessFollow this article's steps and verify the results
Alink JSON and TCP Terminal AccessFollow this article's steps and verify the results
Alink JSON and UDP Wireless Terminal AccessSupplementary reference; read the applicability limits before use

Modbus ​

TutorialReading Notes
Modbus TCP Register Terminal AccessFollow this article's steps and verify the results
Modbus RTU Access via MQTT PassthroughFollow this article's steps and verify the results
Modbus RTU Access via TCP PassthroughFollow this article's steps and verify the results
Modbus TCP-over-RTU Network Passthrough AccessFollow this article's steps and verify the results

JT/T 808 ​

TutorialReading Notes
JT/T 808 and TCP Vehicle Terminal AccessFollow this article's steps and verify the results

IEC103 ​

TutorialReading Notes
IEC103 Access via TCP GatewayFollow this article's steps and verify the results
IEC103 and TCP Protection Device AccessFollow this article's steps and verify the results
IEC103 and UDP AccessSupplementary reference; read the applicability limits before use

IEC104 ​

TutorialReading Notes
IEC104 and TCP Tele-signaling Station AccessFollow this article's steps and verify the results

DL/T 645 ​

TutorialReading Notes
DL/T 645-1997 Meter TCP Gateway Access and Controlled WriteFollow this article's steps and verify the results
DL/T 645-1997 Meter Access via TCPFollow this article's steps and verify the results
DL/T 645-2007 Meter TCP Gateway Access and Controlled WriteFollow this article's steps and verify the results
DL/T 645-2007 Meter Access via TCPFollow this article's steps and verify the results

OPC UA ​

TutorialReading Notes
OPC UA Node Device AccessFollow this article's steps and verify the results

TCP Generic Registration ​

TutorialReading Notes
7E Registration and Heartbeat AccessFollow this article's steps and verify the results

Back to Documentation Center